Y.T. - Professional production of milling, turning, drilling, manufacturers tungsten steel products.

Best Sale

Y.T. / YT / YIH TROUN Cutter Service Introduction

YIH TROUN ENTERPRISE CO., LTD. is Taiwan Cutter supplier and manufacturer with more than 40 years experence. Since 1977, in the Machine Tools Industry, Y.T. / YT / YIH TROUN has been offering our customers high quality Cutter production service. With both advanced technology and 40 years experience, Y.T. / YT / YIH TROUN always make sure to meet each customer's demand.

Result 1 - 24 of 28
  • Indexable Counter Bore
    Indexable Counter Bore
    Counter Bore

    This counter bore has patented carbide strip on the cutter body to avoid wearing out and grinding off the cutter. Available sizes are from M8-M36. The inserts have 4 cutting edges, which can reduce the tool cost more than HSS.


  • 4 in 1 Counter Bore
    4 in 1 Counter Bore
    Counter Bore

    4 in 1 counter bore combines 4 steps of hole making process such as spotting, counter bore and chamfering into one single step. This will not only reduce machining process but also reduces number of tools and tool set up time required for the each process. Besides, it can also be used for sole purpose of spotting.


  • Disc Milling Cutter
    Disc Milling Cutter
    CE Series

    It is mainly used in side milling arbor. When the user choses the side milling cutter, it is advised to choose as small diameter as possible. Because, when the overhang of the arbor is long, a smaller diameter cutter will perform better, this will lead to better stability of the machining process and thus produce longer tool-life.


  • Disc Milling Cutter
    Disc Milling Cutter
    CW Series

    Mainly used on face milling arbor. Usually because overhang of the face milling arbor is short and holding space is large, the tool-life of the insert will be longer. User can utilize BL/BLL holder to fit in different size cutters.


  • Indexable Corner Rounding
    Indexable Corner Rounding

    Y.T. 390 positioning system has produced corner rounding from R1 to R10, which has complete standard stock of all different range inserts. You can reduce the stock as well tool-cost by using Y.T. corner rounding cutter where one shank can fit in different size radius inserts and the shanks available in different length sizes as well. Y.T. has small diameter shanks with complete range of Rounding inserts.


  • UFO Thread Milling Cutter
    UFO Thread Milling Cutter

    UFO thread milling cutter was developed to solve the problems of diverse thread size and small volume requirement. Y.T. UFO thread inserts are used on CNC machine and with the help of threading program, one insert can be used to make several types of threads such internal threads, external threads, pipe thread with different sizes. These inserts can be used in small machines for machining large size threads and high precision requirement threads. This will result in reducing purchasing cost on taps.Other type of straight thread mill insert can make only one type of thread. These types of thread mill inserts require heavy cutting power. However, Y.T. indexable thread mill unlike others can make huge threads in small machines. The entire series are available in 55°, 60°. Insert diameters are available in Ø 12, Ø 15, Ø 20, Ø 25. All the required cutting parameters are available in the catalog. Using programming, various kinds of threads can be achieved.


  • Chamfer King Exclusive for Drilling Machines
    Chamfer King Exclusive for Drilling Machines

    Special design Y.T. indexable chamfer is exclusively for drilling machines and pneumatic machines. It has patented carbide strip design best suitable for unstable machining conditions such as manual drilling machines and plastic materials where there are high chances of burr issues. User does not have to change insert for each type of material. Insert has only one grade for all materials. The cutter does not require regrinding but just need to change the insert when it wears out. There are no burrs on the material after machining.The insert is highly economical available with two cutting edges and one grade for all kinds of materials. We have complete range of specs available from Ø 4 ~ Ø 110 and angles 60°, 90°, 120°. Besides CNC machines, the cutter can also be used on drilling machine, pneumatic machine, electric machine, hydraulic machine etc. Due to its versatile applications, it is called "Chamfer King".


  • Chamfer Cutter for Milling Machine
    Chamfer Cutter for Milling Machine

    Chamfer cutter is available in 30°, 45° with 12mm, 19mm and 40mm inserts. In addition, it can also make very deep chamfering up to 33mm. MC type has adjustable shanks and two chamfering inserts with 4 cutting edges for high economic value. It starts from minimum dia 11mm.


  • Indexable 8 Cutting Edges ODGT Insert
    Indexable 8 Cutting Edges ODGT Insert

    Positive insert angle, Only small cutting force enough for machining.


  • 90° Square Shoulder and Slot Milling Cutter ADMT Insert
    90° Square Shoulder and Slot Milling Cutter ADMT Insert

    Smallest 06 insert with 6mm cutter for slot and square shoulder milling.


  • Indexable High Feed Milling Cutter XPMX / LPMT Insert
    Indexable High Feed Milling Cutter XPMX / LPMT Insert

    Patented design for axial force process to reduce resistance and heat generation in high-speed machining.


  • Aluminum Face Milling Cutter
    Aluminum Face Milling Cutter

    For achieving best surface finishing results and cost reduction Y.T. has designed aluminum cutter with adjustable insert cassettes.1. Using lightweight aluminum cutter will reduce required cutting resistance on the machine and provides very smooth finishing surface on the aluminum material.2. With the help of the insert cassette machining precision and smooth surface can be easily achieved with considerable tool-life.3. Insert has high economic value with 8 cutting edges.


  • Indexable Dovetail Cutter
    Indexable Dovetail Cutter

    Have you been still using the old solid type dovetail cutter? There is always problem of customization and lack of efficiency. It's time to change to Y.T.'s indexable dovetail cutter available in three different degrees with two standard inserts all in standard stock. Maximum AR up to 35mm and most complete range of specs easily available now.1. Indexable design; reduce cost with exchangeable insert. 2. Maximum cutting depth up to 35mm


  • Indexable Saw Blade
    Indexable Saw Blade
    SB Series

    Mainly used for side milling application. It is suggested that smaller the diameter cutter better the performance of the tool. If the small diameter cutter used, it will give better stability and increase insert tool-life.


  • Side Milling Cutter
    Side Milling Cutter
    SC Series

    It is used on side milling arbor. It is always better to use smaller diameter cutter. Because the diameter of the arbor is small and has longer overhang, it is suggested to choose smaller diameter cutters. This will increase the stability as well as the tool-life.


  • Side Milling Cutter
    Side Milling Cutter
    STL Series

    It is used on face milling arbor. Usually the length of the arbor for face milling cutter is short and the holding space is large. It is by connecting with BL / BLL, can achieve better stability and increase tool-life.


  • Taper Pipe Reamer
    Taper Pipe Reamer
    Indexable TAP

    Many customers come across problems of poor tap life and tap breakage while producing taper pipe thread. As a solution to this Y.T. has designed a Taper Pipe Reamer that define the taper hole first so that it can reduce the resistance and make chip removal easier. In addition to that, both reaming and chamfering can be finished in one process, which also reduces the machining steps.


  • Transformer T-slot Cutter
    Transformer T-slot Cutter
    SEL Series

    90° chamfer cutter front and back chamfering, up / down chamfering available in Ø 60 and Ø 80 with 5 ~ 6 teeth. These sizes are available in standard stock. This interchangeable cutter can reduce tool-cost drastically.


  • UFO T-slot Cutter
    UFO T-slot Cutter

    "UFO" design is the Y.T.'s innovative-patented insert positioning with tapered polygonal design to achieve higher centering accuracy. The minimum thickness starts from 0.5mm and the available diameters are Ø 10, Ø 15, Ø 20, Ø 25, Ø 30. There is standard stock available for every 0.1mm size in the size under 2.0mm thickness. It has a complete range of specification and very effective chip removal design best for small grooving. This UFO design is available with UFO chamfer insert and UFO Radius insert. All these inserts can fit in a common tool holder. For more details, see "UFO Family Series".


  • UFO Thread Milling Cutter
    UFO Thread Milling Cutter

    UFO thread milling cutter was developed to solve the problems of diverse thread size and small volume requirement. Y.T. UFO thread inserts are used on CNC machine and with the help of threading program, one insert can be used to make several types of threads such internal threads, external threads, pipe thread with different sizes. These inserts can be used in small machines for machining large size threads and high precision requirement threads. This will result in reducing purchasing cost on taps.Other type of straight thread mill insert can make only one type of thread. These types of thread mill inserts require heavy cutting power. However, Y.T. indexable thread mill unlike others can make huge threads in small machines. The entire series are available in 55°, 60°. Insert diameters are available in Ø 12, Ø 15, Ø 20, Ø 25. All the required cutting parameters are available in the catalog. Using programming, various kinds of threads can be achieved.


  • UFO Chamfer Cutter
    UFO Chamfer Cutter

    Insert diameter available in Ø 12, Ø 15, with 30°, 40° angles. Applicable for front and back chamfering. Higher efficiency achieved with 4 teeth.


  • UFO Radius Cutter
    UFO Radius Cutter

    For grooving O-ring in the work-piece, Y.T. has developed wide range of R-grooving cutter from R0.5 to R2.5. Now all are in standard spec available in stock. High efficiency with 6 teeth.


  • UFO Dovetail Cutter
    UFO Dovetail Cutter

    New added member in the UFO Family in 2016! The smallest diameter dovetail cutter is now available in 45°, 60° with maximum 6 teeth to increase efficiency. The holder for this cutter can also be used to fit in other of cutters in the UFO Family.


  • UFO T-slot Cutter
    UFO T-slot Cutter
    3T Series

    For a bigger diameter T-slot cutter, Y.T. has not only 3T carbide insert but also 3T cutter which can fit with LNGT insert. Y.T. patent clamping design make the min. thickness 1.4 mm insert fit on the cutter without using any screw. It’s the best way to reduce the cost of T-slot cutter and stock cost by choosing different dia.、thickness and also different length of shank. Special chip breaker is also designed for removing chips smoothly while making a T-slot or groove, because there is always high temperature in making T-slot.



Result 1 - 24 of 28