Giải pháp
Q & A
-
Chamfer king _ Y.T. indexable countersink max. dia. 110 mm
Have you ever seen big dia. Countersink in INDEXABLE design?? Here you are!!! Y.T. Tools patented indexable countersink brings a cost effective solution for you, especially for the needs of big chamfering, carbide inserts with 2 cutting edges achieves not only in good toollife but also very convenient to customers to change the insert without removing the whole tool from machine. Long carbide insert with 40mm length brings more possibility in chamfering range. In addition to the standard milling shank, MTH morse taper shank is also available.
-
Chamfer king _ Y.T. indexable countersink
How carbide insert works well in manual drilling machine? Check this interesting patent, we call it " CHAMFER KING"! An innovative design of indexable countersink which achieve excellent tool life and surface finishing in mannual drilling machine. Y.T. indexable countersink provides an economic solution for customers: 1. one single carbide insert has 2 cutting edges, you just need to simply change the insert from the shank without taking the whole HSS countersink from the machine. 2. German coating with carbide insert provides you excellent tool-life, reduce the tool changing time. 3. Universal carbide grade can be used for all different materials, ex: stainless steel, steel, steel, harden steel, aluminum, cast iron, titanium, Inconel 4. Full range of indexbale countersink: 60/ 90/ 120 degree, dia. 4-110mm, also available in morse taper shank type
-
How to put insert into the saw blade without any screwing facility?
Y.T has a special key through which you can lock the insert into the saw blade.
-
What is the difference between two types of side milling cutter in the catalog?
The main difference between SC and SCL cutter is that SCL has a holder BLL to use on the face milling arbor. Since the face milling arbor diameter is thick and short, it will provide better stability and tool-life. If the machining condition does not require using side-milling arbor, we recommend smaller diameter side milling cutter, because the diameter of the side milling arbor is small and long overhang resulting in high instability and higher horse power requirement while making deeper machining.
-
Does Y.T. have a T-slot for machining work-piece with more than HRC 40°?
Y.T. has B100 special grade carbide insert, which is made of combination of rare material metal powder. We usually recommend this grade insert for customers using high HRC material, difficult machining material as well as customers expecting longer insert-life. Y.T. T-slot has standard stock starting from diameter 10mm and thickness 0.5mm to suit all customer requirements. Our new UFO 2 design cutter has minimum 10mm with 4 teeth. Small diameter with highest number of teeth is the best choice for machining with high efficiency.