-
UFO Thread Milling Insert (Full Profile) - 3T
3T Series
The UFO thread milling cutter (full profile) provides a different choice from the market. General thread milling tool start with larger-diameter and fewer no. of teeth, resulting in limited application and low efficiency. YIH TROUN UFO full partial profile thread milling insert has a minimum diameter of 10mm with 4 teeth, along with three threading angles: ISO / UN / BSW. The full profile insert can do machining of several pitches in a single pass, coupled with shanks of different length.
-
Saw Milling Cutter - SBL
SBL Series
Indexable saw milling cutter can not only save inventory cost of cutting tools, but also enhance the stability of cutter by center square positioning design, connection in cutter and holder, as wells as locking with 4 screws. Through the modular adaptor holder design, end user can use their current face milling arbor. Such kind of combined cutter has non-protruded flat bottom and will not cause the issue of interference with bottom. By using our patented insert clamping design, YIH TROUN has developed indexable saw blade of thickness 1.0mm. The geometry design of insert can lead to effective chip evacuation and reduce heat generation during machining. End user can order inserts of various geometries and grades according to their machining requirements without the necessity to replace the cutter body. Patented indexable saw blades are developed by YIH TROUN, which has already effectively reduced machining cost for end user in over 40 countries and enhance their competitive advantage. Aided industries include aerospace, medical parts, electronics, traffic industry and nuclear industry, etc.
-
Side Milling Cutter - STL
STL Series
Indexable side milling cutter exclusively used in slotting / cut off process. The uniquely-designed insert cutting edge is used for big slot width / deep groove or material which is hard for machining. In order to reduce machining resistance, it is designed in stagger teeth to fully improve machining resistance and thus maximize machining efficiency. Modular adaptor design can not only save inventory cost of cutting tools, but also enhance the stability of cutter by center square positioning design, connection in cutter and holder, as wells as locking with 4 screws. Through the modular adaptor holder design, end user can use their current face milling arbor. Such kind of combined cutter has non-protruded flat bottom and will not cause the issue of interference with bottom.
-
Side Milling Cutter - SCL
SCL Series
SCL side milling cutter with adaptor holder design can flexibly exchange different cutter thickness and outer diameter. It is not necessary to purchase another cutter only for a different cutter size. Unique design of insert cutting edge is used for big / deep groove or material which is hard for machining. In order to dramatically reduce machining resistance and thus maximize machining efficiency, insert will be staggered with stagger teeth.
-
Disc Milling Cutter - CEL
CEL Series
CEL disc milling cutter with adaptor holder design can flexibly exchange different cutter thickness and outer diameter. It is not necessary to purchase another cutter only for a different cutter size. Integral pre-harden steel cutter is equipped with three carbide inserts CNGX 1005 / 1305 / 1605 to increase your efficiency in heavy machining or roughing. Fully grinded G-grade insert provides higher machining precision and insert life as well as better chip evacuation. Special chip evacuation geometry on insert is able to effectively reduce machining resistance and machine loading during rapid material removal.
-
Back Milling Cutter - CWL
CWL Series
If it is desired to raise machining efficiency effectively regarding back milling or face milling, multi-cutting edge design of CWL milling cutter is able to raise your metal removal rate effectively. Integral pre-harden steel cutter is equipped with three carbide inserts CNGX 1005 / 1305 / 1605 to increase your efficiency in heavy machining or roughing. Fully grinded G-grade insert provides higher machining precision and insert life as well as better chip evacuation. Special chip evacuation geometry on insert is able to effectively reduce machining resistance and machine loading during rapid material removal. We designed three different insert geometries in connection with chip evacuation for different work piece material: E / ME / M E: In connection with machining of non-metal material ME: In connection with machining of material which is hard for machining or for machining of cast iron M: In connection with machining of steel
-
Side Milling Cutter - SC
SC Series
Indexable side milling cutter exclusively used for slotting / cut-off application. Its unique insert cutting edge design is used for small / large slot width, deep groove or material which is hard for machining. It can achieve maximum metal remove rate to maximize machining efficiency. Side milling cutters of entire series are equipped with original screws with patented design and keys imported from Swiss to enhance locking strength more efficiently to ensure tool life. In order to reduce machining resistance, they are staggered with staggered teeth. There are dimensions in metric units and imperial units available for cutter inner holes. Side milling cutter can be equipped with right-angled SNGX insert. In addition, SNGW corner radius insert developed by YIH TROUN includes multiple rounding required by customers: R0.4 / R0.8 / R1.2 / R1.6 / R2.0 / R2.5 / R3.0. Each insert has 4 cutting edges available. Convenient! Economical!
-
Side Milling Cutter - ST
ST Series
Indexable side milling cutter exclusively used for slotting. Its unique insert cutting edge design is used for large/ small groove width, deep groove or material which is hard for machining. It can dramatically reduce machining resistance to maximize machining efficiency. ST cutter is an integral T-design which is exclusively used for face milling arbor. Fully grinded G-grade insert brings better machining tolerance and surface finishing. Side milling cutters of entire series are equipped with patented designed original screws and keys imported from Swiss to effectively enhance locking strength and ensure tool life. In order to reduce machining force, inserts are staggered with staggered teeth. There are dimensions in metric units and imperial units available for cutter inner holes.
-
Disc Milling Cutter - CE
CE Series
Disc milling cutter CE can directly work with slot in big width and doesn't need several separate processes. Insert with staggered teeth design reduces effectively machining resistance as removing great amount of metal. Integral pre-harden steel cutter is equipped with three carbide inserts CNGX 1005 / 1305 / 1605 to increase your efficiency in heavy machining or roughing. Fully grinded G-grade insert provides higher machining precision and insert life as well as better chip evacuation. Special chip evacuation geometry on insert is able to effectively reduce machining resistance and machine loading during rapid material removal. In addition to customized dimension or cutter / insert design, YIH TROUN's professional R&D team is also engaged in production planning for many well renowned manufacturers and provides customized solution. Regarding chip evacuation for different work piece material, we design three different insert geometries: E / ME / M E: In connection with machining of non-metal material. ME: In connection with material which is hard for machining or machining of cast iron. M: In connection with machining of steel.
-
Disc Milling Cutter - CW
CW Series
Under sufficient machine horsepower, CW disc milling cutter can directly machine groove in big width and doesn't need several separate processes. Besides, solid CW disc milling cuter is also a good choice if you want to increase machining stability. Staggered teeth design of insert can effectively reduce machining resistance during removing great amount of metal. Integral pre-harden steel cutter is equipped with three carbide inserts CNGX 1005 / 1305 / 1605 to increase your efficiency in heavy machining or roughing. Fully grinded G-grade insert provides higher machining precision and insert life as well as better chip evacuation. Special chip evacuation geometry on insert is able to effectively reduce machining resistance and machine loading during rapid material removal. In addition to customized dimension or cutter / insert design, YIH TROUN's professional R&D team is also engaged in production planning for many well renowned manufacturers and provides customized solution. Regarding chip evacuation for different work piece material, we design three different insert geometries: E / ME / M E: In connection with machining of non-metal material. ME: In connection with material which is hard for machining or machining of cast iron. M: In connection with machining of steel.
-
Back Milling Cutter - CB
CB Series
YIH TROUN's back milling cutter is specifically designed to be used for machining on work piece bottom. Above all, reversing work piece repeatedly will need a lot of time for large work piece. Using back milling cutter can directly mill the back side of work piece. It can be also used for side milling and face machining. Its fine-teeth design increase machining efficiency.
-
Straddle Milling Cutter - CDL / CDR
CDL / CDR Series
In order to increase machining efficiency of mass production line, straddle milling cutter can mill required work piece dimension on both sides simultaneously. In addition to reducing two processes into one process, it can also improve the precision of work piece dimension.
-
Chamfer Milling Cutter for CNC Machine - C
C Series
Chamfer milling cutter for CNC of YIH TROUN C series can move vertical or horizontal linear movement on spindle for hole and edge chamfering, or for various chamfering by CNC with program. Two chamfer angles are 30° and 45°. Holder uses pre-harden steel material with higher strength and is equipped with screws and keys imported from Swiss. Tool life is thus raised comprehensively. G-grade grinded carbide insert has totally 3 sizes: XDGT 1203 (Edge length 12 mm) XDGT 1904 (Edge length 19 mm) XDGT 4004 (Edge length 40 mm) Among them, longest chamfering insert is 40mm with very long chamfer edge length. There will be no lapping mark generated during machining of big chamfer. Besides, there are 3 kinds of carbide grade and 3 insert geometries for machining of various work piece material.
-
Dual Chamfer Milling Cutter - MC / HMC
MC / HMC Series
Dual chamfer milling cutter for CNC is another good cutting tool to save your time and cost! 1. Save Time: Upper / lower chamfering can be done by the same cutting tool without tool replacement, e.g. hole inner chamfer or edge chamfer. 2. Save Cost: E grade grinded carbide insert has 4 applicable cutting edges. One insert is shared by 4 cutting edges, cost of single cutting edge is thus very economical. In case that deeper hole chamfer is required, there is also HMC screw-in design available. Length of the extension shank is up to 220mm. Hole diameter with min. chamfer starts from 11mm.
-
Dovetail Milling Cutter - XD
XD Series
Indexable dovetail milling cutter allows you remove metal with high efficiency. Insert geometry design is effective for chip breaking and chip evacuation. It is more efficient and more economical than traditional solid or welded dovetail cutter. Using grinded G-grade coated carbide insert can achieve better surface finishing and greater cutting depth during machining. The cutter uses single insert design and doesn't need two inserts to splice next to each other. There is no issue of lapping mark.
-
Dovetail Milling Cutter - XV
XV Series
Indexable dovetail milling cutter allows you remove metal with high efficiency. XV cutter allows manufacturer to mount it with standard face milling arbor. Insert geometry design is effective for chip breaking and chip evacuation. It is more efficient and more economical than traditional solid or welded dovetail cutter. Using grinded G-grade coated carbide insert can achieve better surface finishing and greater cutting depth during machining. The cutter uses single insert design and doesn't need two inserts to splice next to each other. There is no issue of lapping mark.
-
Aluminum Alloy Face Milling Cutter - MO
MO Series
Do you want to lower cost and achieve great surface finishing at the same time? Take a try with adjustable aluminum face milling cutter of YIH TROUN! 1. Using aluminum cutter to reduce the weight of cutter as well as machining resistance, and thus raises the surface finishing of aluminum machining. 2. Adjustable tool clamping design can achieve precise evenness of carbide insert tips through adjustment of tool clamping structure and thus raises the surface finishing of work piece as well as insert life. 3. Insert uses 8 cutting edges with high economical value.
- Home Homepage
- Profile Company Profile
- Products Product Category
-
News Event and News
- Annual Y.T. Corporate Exhibition 2024
- 2023 METALEX
- 2023 EMO HANNOVER
- TIMTOS 2023
- AMB International Metalworking Exhibition
- The success of the researchment in metal cermet insert
- Vietnam branch office set up
- New design modification : engraving / chamfer king /center drill
- TIMTOS Online 2021
- MANUFACTURING INDONESIA 2018
- EMAF 2018
- 2018 Taiwan International Machine Tool Show (TMTS)
- JIMTOF 2018 The 29th Japan International Machine Tool Fair
- Manufacturing Technology Expo, Semarang 2018
- Manufacturing & Machine Tool Surabaya 2018
- India’s Premier International Machine Tools Show 2018
- BIEMH 2018
- Metaltech Malaysia 2018
- China Changzhou International Industrial Equipment Fair 2018
- Bangkok, Thailand MTA 2018
- Yantai Intemational Equipment Manufacture Industry Exhibition 2018
- The Exhibition of Lijia Internation Machinery 2018
- Metal Equipment Tools Lviv VIII specialized exhibition 2018
- China CNC Machine Tool Fair-CCMT 2018
- SUZHOU International Industry Expo- SIIE 2018
- Italy MECSPE 2018
- Konepaja Messut 2018, Finland
- TechniShow 2018- Utrecht, Netherlands
- Tianjin International machine Tool Exhibition-IMEX 2018
- Spot drill precision to reduce problems of drills and taps breakage
- New Member in the UFO Family ~ UFO Dovetail Cutter
-
Solution Q & A
- How to reduce the machining cost in hole making
- UFO thread milling insert _ partial and full profile
- Indexable Circlip and Radius insert
- Y.T. mini taper polygon patented design
- Full range of Y.T. indexable UFO T-slot cutter
- Customized indexable saw blade in dia. 600 mm
- Multi-functional Saw blades
- ndexable UFO MILL
- Chamfer king _ Y.T. indexable countersink max. dia. 110 mm
- Chamfer king _ Y.T. indexable countersink
- How to put insert into the saw blade without any screwing facility?
- What is the difference between two types of side milling cutter in the catalog?
- Does Y.T. have a T-slot for machining work-piece with more than HRC 40°?
- Contact Us Send Inquiry Now
- E-Catalog YT-Catalog Download